IAP-2000PS

Industrial 802.11n Wireless Access Point

 
 
Industrial Wireless LAN
For robust Wireless access, the PLANET IAP-2000PS Industrial Access Point with PoE injector function is specially designed for the Wi-Fi applications over a TCP/IP network in the harden environment. The IAP-2000PS comes with 802.11n Wireless interface to provide up to 300Mbps performance and with the 4-Port IEEE 802.3af PoE injector interface to offer flexible power supply service. The IAP-2000PS is rated to operate at the temperature from -10 to 60 Degree C and is the ideal solution to wireless transmission in any harsh industrial environment.

 
 
IPv6 / IPv4 Web and SNMP Management
The IAP-2000PS supports both IPv6 and IPv4 web management functions. Its SNMP feature allows the system administrator to remote monitor and control the network devices more efficiently. With the easy and friendly management interface and plenty of management functions included, the IAP-2000PS is the best choice for system Integrators to build the large wireless service and for SMB to connect with the IPv6 network.

Multiple Wireless Network Technologies for Greater Access
The IAP-2000PS features 802.11n radio with 2T2R antenna technology compliant with 802.11b/g standards. Compared with general wireless access points, the IAP-2000PS offers more powerful and flexible capability for LAN clients to access the network with management functions.
 
 
Wide Range of Wireless Security Support
To secure the wireless communication, the IAP-2000PS supports up-to-date encryption, WPA-PSK /WPA2-PSK with TKIP / AES encryption. In order to simplify the security settings, the IAP-2000PS supports Wi-Fi Protected Setup (WPS) configuration with PBC/PIN type. By just clicking the WPS option, the secure connection between the AP and wireless client will be established immediately.

IEEE 802.3af Power over Ethernet Industrial Switch
PoE feature is supported in the industrial Ethernet devices more and more often for efficient operation in harsh environments. The IAP-2000PS in-line power follows IEEE 802.3af standard and able to give power to 4 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5 / 5e UTP wire. With data and power over Ethernet from one unit, the IAP-2000PS shall reduce cables deployment and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power will lower the installation costs and simplifies the installation effort. Furthermore, there is only 24V DC input in some industrial environments, the IAP-2000PS supports both 24V DC and 48V DC voltages input and able to provide more wide range of industrial IEEE 802.3af PoE applications.

Easy Installation and Wide Range of Power Usage 
The IAP-2000PS is packaged in a strong IP30 case that allows either DIN rail or panel mounting for efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operations. It also offers dual-redundant, reversible polarity 24V or 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.
 
Ordering Information
IAP-2000PS Industrial 802.11n Wireless Access Point (2T2R, 4 PoE Ports)
High Speed Wireless LAN in harden environment
Compliant with IEEE 802.11n and 802.11b/g standard, the IAP-2000PS provides stronger wireless signal, higher data rate and better performance than normal 802.11g wireless AP. Furthermore, the IAP-2000PS can act as a power supply equipment to other network devices and features the latest wireless encryption type and multiple SSID function to prevent unauthorized access or invasion.
 
 
 
Ordering Information
IAP-2000PS Industrial 802.11n Wireless Access Point (2T2R, 4 PoE Ports)
‧ 4 x 10/100Base-TX Ports with PoE (PSE, Power Sorucing Equipment)
‧ Complies with IEEE 802.11n Wireless LAN Speed up to 300Mbps
‧ IPv4 / IPv6 Web Management
‧ 2 x 5dBi Detachable Omni-directional Antenna
‧ Supports 64/128-bit WEP, WPA / WPA2, and WPA-PSK / WPA2-PSK, 802.1x
‧ Supports WISP Mode, IEEE 802.1Q VLAN
‧ -10 to 60 Degree C Operating Temperature
‧ Redundant Power Design
‧ IP30 Aluminum case protection
‧ DIN Rail and Wall-mount Design
 
Ordering Information
IAP-2000PS Industrial 802.11n Wireless Access Point (2T2R, 4 PoE Ports)
Hardware Specification
10/100Base-TX Ports 4 x 10/100Base-TX Auto-Negotiation
Auto MDI / MDI-X
IEEE 802.3af PoE Ports 4 x PSE (Port 1-4 )
Antenna 2 x Detachable RP-SMA Connector
2 x 5dBi SMA Omni-directional antenna included in the package
Enclosure IP30 Metal Case
LED Indicators P1, P2, PWR, FAL, WPS, WLAN, SEC, LAN1~4, PoE
Button WPS Button
Reset Button
Dimensions (W x D x H) 135 x 87.8 x 56 mm
Weight 871g
Power Requirement DC 24V / 48V
Installation DIN Rail Kit and Wall Mount Ear
Wireless Interface Specification
Standard Compliance with IEEE 802.11b/g/n
Frequency Band 2.4 to 2.4835GHz (Industrial Scientific Medical Band)
Modulation Type DSS with DBPSK, DQPSK, QPSK and CCK
OFDM with BPSK, QPSK, 16-QAM and 64-QAM
Wireless Data Rate IEEE 802.11b: 1/2/5.5/11Mbps
IEEE 802.11g: 6/9/12/18/24/36/48/54Mbps
IEEE 802.11n: 14/29/43/58/87/116/130/144Mps in 20MHz
       30/60/90/120/180/240/270/300Mbps in 40MHz
Opt. Channel America / FCC: 2.414~2.462GHz (11 Channels)
Europe / ETSI: 2.412~2.472GHz (13 Channels)
Japan / TELEC: 2.412~2.484GHz (14 Channels)
RF Output Power IEEE 802.11b: 18 dBm
IEEE 802.11g: 15 dBm
IEEE 802.11n: 15 dBm
Receiver Sensitivity IEEE 802.11b CCK 1.0Mbps: -94dbm
              11b CCK 11.0Mbps: -91dbm
IEEE 802.11g OFDM 6Mbps: -92dbm
              11g OFDM 54Mbps: -76dbm
IEEE 802.11n 20MHz MCS7: -72dbm
              11n 40MHz MCS7: -70dbm
Wireless Management Features
Wireless Mode Access Point
Channel Width 20MHz / 40MHz
Data Encryption Security 64 bit / 128 bit WEP
WPA / WPA2
WPA-PSK / WPA2 / WPA2-PSK
IEEE 802.1x Network Access Control
Management Web-Based Configuration
Wireless Isolation Yes
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type End-Span
PoE Power Output Per Port 48V DC, 350mA. Max. 15.4 Watts
Power Pin Assignment 1/2(+), 3/6(-)
Protocol
Protocol / Feature Bridge and WISP mode
WDS and WPS
Static Routing and RIPv1/2
DMZ and Virtual Server
IEEE 802.1D
IEEE 802.1Q VLAN
QoS
SNTP
WMM
DHCP Server / Client
IGMP Proxy and DNS Proxy
UPnP and DDNS
SNMP
Management Web-Based configuration
Standards Conformance
Standards Compliance IEEE 802.11b/g and 802.11n Wireless LAN
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.1Q VLAN
Environment Specification
Temperature / Humidity Operating: -10~60 Degree C, 5~ 90% (non-condensing)
Storage: -20~70 Degree C, 0~95% (non-condensing)
Emission FCC, CE
Stability Testing IEC60068-2-32 (Free Fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)

Ordering Information
IAP-2000PS Industrial 802.11n Wireless Access Point (2T2R, 4 PoE Ports)

Datasheet

Date Version Description Download
2013-03-08 1.0 IAP-2000PS

Firmware

Date Version Description Download
2012-04-27 1.1b120131 Initial Release.

Quick Guide

Date Version Description Download
2012-03-02 1.1 Initial Release.

User's Manual

Date Version Description Download
2012-03-02 1.2 Initial Release.
Ordering Information
IAP-2000PS Industrial 802.11n Wireless Access Point (2T2R, 4 PoE Ports)