GSD-802S

8-Port 10/100/1000Mbps with 2 shared SFP Web Smart Gigabit Switch

Cost-effective Desktop Size / High-Speed / Fiber Capability WEB Smart Switch
The GSD-802S is a Web Smart Gigabit Switch with 8-Port 10/100/1000Mbps copper ports and 2 SFP slots, utilizing a compact form factor which can be mounted in a 10/19-inch rack with optional rack-mounting kits, and placed on desktop. The enhanced management features are as below:
 • 802.1Q VLAN       • 802.1X Authentication / RADIUS
 • Rapid Spanning Tree   • SNMP monitor and SNMP Trap
 • IGMP Snooping

High Gigabit Performance / Wire-Speed Switching
With 16Gbps non-blocking switch fabric, 8K MAC Address table and 802.3x Full-Duplex flow control, the GSD-802S offers wire-speed packet transfer performance without risk of packet loss. The two Gigabit SFP (Small Factor Pluggable) slots can be installed with 1000Base-SX / LX mini-GBIC modules which offer incredible extensibility, flexibility and connectivity to the Core switch or Servers.

Friendly / Simple Web Management Interface
For efficient management, with its built-in Web-based management, the GSD-802S offers an easy-to-use and configuration facility. Via the WEB interface, the GSD-802S can be programmed for basic Switch management functions such as per port speed duplex settings, Port Trunking, VLAN, Port Mirroring, Rapid Spanning Tree, 802.1X network security authentication and Misc Configuration. Additionally, the firmware includes advanced features such as IGMP snooping, QoS (Quality of Service), broadcast storm and bandwidth control, to enhance bandwidth utilization.

Remote and Centralize Management installation
Affording the current network to grow and expand, the GSD-802S supports standard Simple Network Management Protocol (SNMP) and can be monitored via any standard-based management software. These features provide a cost-effective way to manage the device from the Internet whenever you are working or at home.

Easy Cabling installation
All eight RJ-45 copper interfaces support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. The MDI / MDI-X auto-detection supports wired connection to any Ethernet device without requiring cross-over cables.
Ordering Information
GSD-802S 8-Port 10/100/1000Mbps with 2 shared SFP Web Smart Gigabit Switch
Accessories
RKE-10A Rack Mount Kits for 10” cabinet
RKE-10B Rack Mount Kits for 19” cabinet
Backbone Switch
With a non-blocking design and desktop size, the PLANET's GSD-802S 8-Port Gigabit Ethernet Switch are as easy as installing a Fast Ethernet network, and it can be used to build up a Gigabit high-bandwidth switched network quickly and easily. With supporting for VLAN and port trunking on the GSD-802S, users can directly connect to department switches or backbone servers.

Workgroup / Department Switch
With 8 10/100/1000Mbps ports, the GSD-802S provides a cost-effective and high-performance solution for SMB Departments and workgroups. In multiple applications, the advanced functionality of the GSD-802S eliminates traditional problems associated with Ethernet. Using the built-in VLAN functionality can segregate users and the Spanning tree can reduce the loop occur.

FTTx Edge Switch
With two mini-GBIC 1000Base-SX / LX SFP (Small-Form Factor Pluggable) interfaces, the deployed distance of GSD-802S can be extended from 550 meters (Multi-mode fiber) up to above 10 / 50 / 70 / 120 kilometers (Single-mode fiber) which just provides a high-performance edge device for FTTx solutions. To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTB (Fiber to the Building) for enterprises, the various distances of SFP (Small-Form Factor Pluggable) and Bidi (WDM) transceivers are optional for customers. For security and applications, the 8 Gigabit ports can be configured with VLAN settings and connect to different units, offices, buildings, houses and departments.
Ordering Information
GSD-802S 8-Port 10/100/1000Mbps with 2 shared SFP Web Smart Gigabit Switch
Accessories
RKE-10A Rack Mount Kits for 10” cabinet
RKE-10B Rack Mount Kits for 19” cabinet

Generic Features
• Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX, IEEE 802.3ab,
 1000Base-T, IEEE 802.3z Gigabit SX / LX Ethernet standard
• 8-Port 10/100/1000Mbps Gigabit Ethernet ports
• 2 mini-GBIC / SFP slots, shared with Port-7 and Port-8
• Each Switching port supports auto-negotiation-10 / 20, 100 / 200 and
 1000 / 2000Mbps supported
• Auto-MDI / MDI-X detection on each RJ-45 port supports CSMA / CD protocol
• Prevents packet loss with back pressure (Half-Duplex) and 802.3x PAUSE
 frame flow control (Full-Duplex)
• 8K MAC address table, automatic source address learning and ageing
• 16Gbps switch fabric, non-blocking switch architecture
• 9K Jumbo Frame supports at all speed (10 / 100 / 1000Mbps)

Layer 2 Switching
• Supports Port-Based and 802.1Q VLAN function, up to 64 VLAN groups
• IEEE 802.1w Rapid-Spanning Tree protocol support
• Link Aggregation supports static mode and LACP (IEEE 802.3ad) - up to 4
 Trunk groups Each trunk is maximum up to 8 ports

Multicast
• IGMP Snooping for multicast filtering, supports v1 and v2
• IGMP Query Mode supports for multimedia application

Quality of Service
• 4 QoS classes per port
• Traffic class assignment based on 802.1p tag, or DSCP field
• Multicast and Broadcast Storm Control as well as Flooding Control

Security
• Port Mirroring support for dedicated port monitoring
• IEEE 802.1X Port-Base access control, RADIUS ServerAuthentication
• Static MAC Address assigns destination MAC address at specifies port

Management
• Remote Web management interface
• Firmware upgrade through web interface
• Cable Diagnostics technology
• Supports SNMPv1 with RFC-1213 / 1573-Interface group and RMON Group 1
 ( Statistics)
• SNMP Trap
• Supports PLANET Smart-DISCOVERY Utility for deploy management
Ordering Information
GSD-802S 8-Port 10/100/1000Mbps with 2 shared SFP Web Smart Gigabit Switch
Accessories
RKE-10A Rack Mount Kits for 10” cabinet
RKE-10B Rack Mount Kits for 19” cabinet
Hardware Specification
Hardware Version Version2
Copper Ports 8 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 2 SFP interfaces, shared with Port-7 and Port-8
Switch Architecture Store-and-forward
Switch Fabric 16Gbps / non-blocking
Switch Throughput 11.9Mpps
Address Table 8K MAC address table with Auto learning function
Share Data Buffer 176K bytes on chip
Flow Control Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
Jumbo Frame 9K Bytes
LED Power, 1000 Link/Act, 100/10 Link/Act per port
Dimensions (W x D x H) 217 x 135 x 43.5 mm
Weight 1.1kg
Power Requirement 100 - 240VAC, 50 – 60Hz, Auto-sensing
Power Consumption 8.7 watts / 27.31 BTU
Operating Temperature 0~50 Degree C
Operating Humidity 5~95%(non-condensing)
Layer 2 Function
Management Interface Web Browser, SNMPv1, v2c monitor and SNMP Trap
Port Configuration
- Port disable/enable. Auto-negotiation 10/100/1000Mbps full and half
duplex mode selection.
- Flow Control disable / enable.
VLAN Port-Based / 802.1Q Tagged Based VLAN
Up to 64 VLAN groups
Link Aggregation Supports 4 groups of 8-Port trunk
IEEE 802.3ad LACP
QoS Traffic classification based on 802.1p priority, DSCP field in IP Packet
IGMP Snooping IGMP (v1/v2) Snooping, up to 64 multicast Groups
SNMP MIBs RFC-1213 MIB-2
RFC-1573-Interface MIB
RFC-2819 RMON MIB (Group 1)
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000-T
IEEE 802.3z Gigabit SX / LX
IEEE 802.3x Flow Control
IEEE 802.3ad Port trunk with LACP
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
Network Media 10Base-T – UTP / STP category 3, 4 or 5 cable
100Base-TX – UTP / STP category 5 cable
1000Base-T – UTP / STP category 5e / 6 cable
1000Base-SX –
• 62.5 / 125µm multi-mode fiber optic cable, up to 220m
• 50 / 125µm multi-mode fiber optic cable, up to 550m
1000Base-LX–
• 9 / 125µm single-mode fiber optic cable, up to 120km ( Vary on SFP Module)
Ordering Information
GSD-802S 8-Port 10/100/1000Mbps with 2 shared SFP Web Smart Gigabit Switch
Accessories
RKE-10A Rack Mount Kits for 10” cabinet
RKE-10B Rack Mount Kits for 19” cabinet

Datasheet

Date Version Description Download
2012-06-22 2.0 GSD-802S

Firmware

Date Version Description Download
2009-09-11 1.3b0900901 (1) [RSTP] Fix RSTP incorrect issue caused by firmware version 1.2.
(2) [IGMP Snooping] Fix discard IGMP packets which has checksum error on IP layer.

Quick Guide

Date Version Description Download
2011-04-13 2.0 Release for Hardware version 2.0.

User's Manual

Date Version Description Download
2011-04-13 2.0 Release for Hardware version 2.0.
2009-05-26 1.1 User's Manual
Ordering Information
GSD-802S 8-Port 10/100/1000Mbps with 2 shared SFP Web Smart Gigabit Switch
Accessories
RKE-10A Rack Mount Kits for 10” cabinet
RKE-10B Rack Mount Kits for 19” cabinet