VF-402-KIT

4-Channel Video over Fiber Bundle Kit

Reliable Long Distance Solution for Analog Surveillance System
To help current analog camera deployment in long distances efficiently and provide high video quality and reliable signal, PLANET develops the Video over Fiber media converter kit, VF-402-KIT, which is ideal for extending the distance and signal conversion by transmitting the Video and data over the fiber-optic cable. Applies the intelligent encoding / decoding technology in the compact size mini box, the CCTV over Fiber media converter VF-402-KIT enables the videos to be delivered in high quality up to 20km long distance.
Fiber Optic Communication for Video and Serial Data
The VF-402-KIT consists of a Video Transmitter and a Video Receiver:
 
 • VF-402-T: 4-Channel Video over Fiber Transmitter
 • VF-402-R: 4-Channel Video over Fiber Receiver

It is a digital fiber-optic transmission system to bring users a cost-effective solution for transmission of 4 channels uncompressed digital video and 1 reverse RS-485 async-data over one single fiber cable. The VF-402-KIT is an adjustment free device while providing high quality and real-time video transmission. It can be widely used in Intelligent Transportation Systems (ITS), Traffic Surveillance, security monitoring, automation control, intelligent residential districts and etc.
Industrial Level Monitoring Systems
The VF-402-KIT can be applied to Industrial level operation under wide temperature range -25 to 75 Degree C. It performs zero distortion of high quality video transmission and clear graphics in long distance by adopting advanced international uncompressed full digital error correction and gigabit fiber optical transmission technology. This series of optical transceiver supports hot plug and can be deployed independently or in rack-mounted structure. It is simple to operate without requiring field adjustment. Therefore, the VF-402-KIT is very applicable to different working environments.
Ordering Information
VF-402-KIT 4-Channel Video over Fiber Bundle Kit (VF-402-T + VF-402-R)
The VF-402-KIT consists of 4 channels video over fiber optical transceiver and receiver to transmit video andRS-485 signal through a reliable single mode / single fiber link. It is an ideal cost-effective solution for surveillance system that requires high display quality and high performance signal transmission over long distances. The VF-402-KIT features easy plug and play; that means the operator does not need to configure the pair of the video over fiber transmission in advance.
Typical Applications
• Intelligent Transportation Systems (ITS)
• Toll Collection
• Traffic Surveillance
• Air Traffic Management (ATM)
• Rail Signaling
• Perimeter Alarms and Area Monitors
• Telemedicine and Teleconference
• Industrial Surveillance
• Intelligent Building
• CCTV network
Ordering Information
VF-402-KIT 4-Channel Video over Fiber Bundle Kit (VF-402-T + VF-402-R)
• High-Speed synchronous digital transmission up to 20km
• Fiber optic transmission of four video signals on one fiber with RS-485 data signals
• Friendly status indication for power supply, optical signal and video
• No electromagnetic interference, radio frequency interference and ground current
• Guarantees safe transmission under poor electromagnetic environment
• Maximum tolerable link loss for single mode single fiber is 18db
• Video bandwidth of 6.5 MHz, SNR > 63dB
• Industrial level of operating under wide temperature range -25 to 75 Degree C
Ordering Information
VF-402-KIT 4-Channel Video over Fiber Bundle Kit (VF-402-T + VF-402-R)
Video Characteristic
Video Channel 4 channel Bi-direction
Video Connector BNC
Video Input / Output Impedance 75ohm / unbalanced interface
Video Input / Output Voltage 1.0 Vpp / Typical peak-peak value
Video Bandwidth 5Hz to 6.5MHz
Video Digital Bit Width 8/10 bit
Differential Gain(DG) <1.3% (Typical Value)
Differential Phase(DP) <1.3° (Typical Value)
SNR Weighted >63dB (Typical Value)
Data Interface
Data Channel 4 channel
Physical Protocol RS-485
Operation Mode Simplex
Data Connector 4 Pin terminal block with screw clamps
Data Rate DC-150 Kbps
Data Distance RS-485: 0-20KM
BPS 0-115.2Kbps
Bit Error Rate (BER) < 10-9
Optical Interface
Optical Connector FC
Fiber Type Single-mode, single fiber
Distance 20km for single mode
Optical Wavelength VF-402-T:TX: 1310nm, RX: 1550nm
VF-402-R:TX: 1550nm, RX: 1310nm
Transmitter couple power Max. : 4dBM, Min. : -4dBM
Receive Sensitivity -26dBm
Link budget From 22dB to 30dB at 1310nm or 1550nm
Cable 9/125μm single-mode cable
Hardware Specification
LED Indicators • One Power
• One for Video
- Green, Link
• One for Fiber Optic
- Green, Link
Dimension (W x D x H) 110 x 174 x 47 mm
Weight 560g
Power Requirement DC 5V / 2A, AC 90~264V, 50~60HZ
Chassis Current Consumption 0.75Amp for 4 channel video and 1 channel data
Mechanical Metal
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Environment
Operating Temperature: -25 ~ 75 Degree C
Relative Humidity: 0 ~ 95% (non-condensing)
Storage Temperature: -40 ~ 85 Degree C
Relative Humidity: 5 ~ 95% (non-condensing)
Ordering Information
VF-402-KIT 4-Channel Video over Fiber Bundle Kit (VF-402-T + VF-402-R)

Datasheet

Date Version Description Download
2012-11-23 1.0 VF-402-KIT

User's Manual

Date Version Description Download
2012-10-05 1.0 Initial Release
Ordering Information
VF-402-KIT 4-Channel Video over Fiber Bundle Kit (VF-402-T + VF-402-R)