POE-E202

1-Port 802.3at PoE+ to 2-Port 802.3af/at Gigabit PoE Extender

 
 

Overview

PoE Solution for Breaking RJ45 100m Limitation
PLANET POE-E202 is a 1-port PoE+ to 2-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The POE-E202 can obtain a maximum of 30-watt PoE power from PoE+ input port and supplies a maximum of 25-watt PoE power budget for two PoE output ports, extending both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time.
The POE-E202 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.
 
 
Plug and Play Installation
The POE-E202 is quite easy to be installed by simple plug and play. It is used between a power source equipment (PSE) and a powered device (PD). The POE-E202 injects power to the PD without affecting the data transmission performance. The POE-E202 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The POE-E202 is designed in a compact box containing three RJ45 ports, of which one "PoE IN" port functions as PoE (Data and Power) input and the other two "PoE OUT" ports function as PoE output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously between the PSE and PD.
 
 
Ordering Information
POE-E202 1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender

Application

One Power Sourcing for Multi Powered Devices Solution
Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance and the long-distance IP camera distribution, PLANET POE-E202 is quite a useful Gigabit PoE extender if users have most of their network already set up, and hope to expand network communications and overcome cable distance limitations offering connections to devices in locations where traditional networking does not allow.
 
 
Ordering Information
POE-E202 1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender

Key Features

Physical Port
    • 3-port 10/100/1000BASE-T Gigabit RJ45 interface
- 1-port data + power input- 2-port data + power output
Power over Ethernet
    • 1-port data + power input
- Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD- Supports PoE input power up to 30.8 watts
    • 2-port data + power output
- Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE- Up to 2 IEEE 802.3af/802.3at devices powered- Supports PoE power up to 25 watts for each PoE port- Auto detects powered device (PD)
  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device

Layer 2 Features
  • Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • 10K iumbo packet support
  • IEEE 802.1Q VLAN transparency
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

Case and Installation
  • No external power cable installation required
  • Made of metal, desktop size design
  • Wall-mountable, Plug-and-Play installation
  • 0 ~ 50 degrees C operating temperature
 
Ordering Information
POE-E202 1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender

Specification

Interfaces
PoE IN 1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE “Data + DC power” in 
auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE OUT 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC power” out
auto MDI/MDI-X, auto-negotiation RJ45 connector
Power over Ethernet
PoE Standard “PoE In” Port
IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD
Per “PoE Out” Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
IEEE 802.3af Power over Ethernet end-span PSE
PoE Power Supply Type End-span (Type A)
PoE Power “PoE In” Port
52~56V DC, max. 30.8 watts
Per “PoE Out” Port
44~55V DC, max. 25 watts
Power Pin Assignment “PoE In” Port
1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
Per “PoE Out” Port
1/2 (+), 3/6 (-)
Hardware Specifications
Data Rate 10/100/1000Mbps
MAC Address Table 2K
Data Buffer 2Mbits
Switch Architecture Store-and-Forward
Switch Fabric 6Gbps
Switch Throughput 4.46Mpps @ 64 bytes
Jumbo Frame 10KB
Flow Control IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
LED Indicators “PoE In” Port: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green)
“PoE Out” Port 1: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green)
“PoE Out” Port 2: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green)
Protection ESD (Ethernet): 2KV (TBD)
Surge (EFT for power) : 2KV (TBD)
Enclosure Metal
Installation Wall mountable
Dimensions (W x D x H) 140 x 77 x 28 mm
Weight 234g
Power Requirements IEEE 802.3at compliant with voltage within 52V-56V DC
Power Consumption 1.6 watts/5.5BTU (System on with PoE input)
2.2 watts/7.5BTU (Ethernet full loading without PoE function)
36 watts/122.8BTU (Full loading with PoE function)
Network Cable 10BASE-T: 4-pair UTP Cat. 5 up to 100m (328ft)
100BASE-TX: 4-pair UTP Cat. 5 up to 100m (328ft)
1000BASE-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft)
EIA/TIA-568 100-ohm STP (100m, 328ft)
Standard Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standard Compliance IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3x Flow Control
Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Ordering Information
POE-E202 1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender

Download

Datasheet

Date Version Description Download
2016-07-11 1.0 POE-E202

User's Manual

Date Version Description Download
2016-07-01 1.0 Initial release.

EC Declaration

Date Version Description Download
2016-08-19 1.0 EC Declaration
Ordering Information
POE-E202 1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender

Related Products

Photo Model Description
IPOE-E174 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender
IPOE-E202 Industrial 1-Port 802.3at PoE+ to 2-Port 802.3af PoE Extender
POE-E101 IEEE 802.3af Power over Ethernet Extender
POE-E201 IEEE 802.3at Power over Gigabit Ethernet Extender
Ordering Information
POE-E202 1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender