WNAP-7205

5GHz 802.11a/n Wireless Outdoor Access Point

 
 
High Power Outdoor Wireless Coverage
PLANET Technology introduces the latest high power outdoor wireless LAN solution - the outdoor wireless AP, WNAP-7205. It provides higher transmit power, better performance, and widely coverage than standard outdoor wireless AP. The WNAP-7205 is compatible with IEEE 802.11a/n standard supporting the data rate up to 150Mbps in 802.11n mode. The WNAP-7205 not only has built-in 16dBi panel Antenna but also reserves one RP-SMA Type Antenna Connector to allow versatile antenna installations and multiple adjustable transmit output power controller. Therefore, the WNAP-7205 is quite suitable for widely open space applications.
 
 
Multiple Operating & Wireless Modes
The WNAP-7205 supports multiple wireless communication connectivity (AP / Client CPE / WDS PtP / WDS PtMP / Repeater / Universal Repeater) allowing for various application requirements and thus it gives users more comprehensive experience when using the WNAP-7205. It helps users to easily build a wireless network and extend the wireless range of existed wireless network.
The WNAP-7205 also supports WISP mode, so CPE users could easily connect to Internet via WISP provider or connect to a wired network. 
 
 
Advanced Security and Management
In aspect of security, besides 64/128- bit WEP encryption, the WNAP-7205 integrates WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x authority to secure and protect your wireless LAN. The wireless MAC filtering and SSID broadcast control consolidate the wireless network security and prevent unauthorized wireless connection.

Highly Reliable Outdoor Device
The WNAP-7205 is perfectly suitable to be installed in outdoor environments and exposed locations. With its IP55 casing protection, the WNAP-7205 can perform stably under rigorous weather conditions including heavy rain and wind. With the proprietary Power over Ethernet (PoE) design, the WNAP-7205 can be easily applied in the areas where power outlets are not available. It is the best way using the WNAP-7205 to build outdoor wireless access applications between buildings on campuses, business, rural areas and etc.
 
 
Easy Installation & Management
With User-friendly Web UI and step by step Setup Wizard, the WNAP-7205 is easy to install, even for a user who never experiences setup a wireless network.
 
 
Ordering Information
WNAP-7205 802.11a/n Wireless Outdoor Access Point
 
Accessories
CB-STP-25 25 Meters STP Cat5 Cable
ANT-FP18A 5GHz 18dBi Flat Panel Directional Antenna
ANT-OM10A 5GHz 10dBi Omni-Directional Antenna
ANT-FP23A 5GHz 23dBi Flat Panel Directional Antenna
ANT-SE17A 5GHz 16.5dBi Sector Antenna
WL-SMA-0.6 0.6M RP-SMA(M) to N(M) Cable
WL-SMA-6 6M RP-SMA(M) to N(M) Cable
Longer distance coverage between LAN connections
The WNAP-7205 is a cost-effective outdoor wireless solution for widely open space applications. It is best suitable for outdoor wireless connections between buildings.
 
 
With built-in RP-SMA Type Antenna connector, the WNAP-7205 brings higher coverage and longer distance of wireless connection. The WNAP-7205 provides high output power with multiple adjust Tx controller, which allows CPE users to easily install and adjust the suitable value in appropriate locations. The WISP mode supported also enables CPE users to connect to Internet via local WISP provider.
 
 
**Sincerely suggest matching the same model in outdoor wireless bridge application for getting best performance.
 
 
Ordering Information
WNAP-7205 802.11a/n Wireless Outdoor Access Point
 
Accessories
CB-STP-25 25 Meters STP Cat5 Cable
ANT-FP18A 5GHz 18dBi Flat Panel Directional Antenna
ANT-OM10A 5GHz 10dBi Omni-Directional Antenna
ANT-FP23A 5GHz 23dBi Flat Panel Directional Antenna
ANT-SE17A 5GHz 16.5dBi Sector Antenna
WL-SMA-0.6 0.6M RP-SMA(M) to N(M) Cable
WL-SMA-6 6M RP-SMA(M) to N(M) Cable
Industrial Compliant Wireless LAN & LAN
　　• Compliant with IEEE 802.11n wireless technology capable of up to 150Mbps data rate
　　• Backward compatible with 802.11a standard
　　• Equipped with 10/100Mbps RJ-45 Ports for LAN & WAN, Auto MDI / MDI-X supported

Fixed-network Broadband Router
　　• Supported connection types: Dynamic IP / Static IP / PPPoE / PPTP / L2TP
　　• Supports multiple sessions IPSec, L2TP and PPTP VPN pass-through
　　• Supports Virtual Server, DMZ and Port Forwarding for various networking applications
　　• Supports DHCP Server, UPnP, Dynamic DNS

RF Interface Characteristics
　　• Built-in 16dBi Directional Antenna
　　• High Output Power Up to 300mW with multiple adjustable transmit power control
　　• Reserve RP-SMA Type Connector

Outdoor Environmental Characteristics
　　• IP55 Enclosure
　　• Passive Power Over Ethernet Design
　　• Reset Button on PoE Injector
　　• Operating Temperature: -20 ~ 70 Degree C

Multiple Operation & Wireless Mode
　　• Multiple Operation Modes: Bridge, Gateway, Ethernet Converter
　　• Multiple Wireless Modes: AP, Client CPE(WISP), WDS PtP, WDS PtMP, Repeater, Universal Repeater 

Secure Network Connection
　　• Supports Software Wi-Fi Protected Setup (WPS)
　　• Advanced security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES), and 802.1x Authentication
　　• Supports NAT firewall features, with SPI function to protect against DoS attacks
　　• Supports IP / Protocol-Based access control and MAC Filtering

Easy Installation & Management
　　• Web-Based UI and Quick Setup Wizard for easy configuration
　　• Remote Management allows configuration from a remote site
　　• System status monitoring includes DHCP Client, System Log
 
 
Ordering Information
WNAP-7205 802.11a/n Wireless Outdoor Access Point
 
Accessories
CB-STP-25 25 Meters STP Cat5 Cable
ANT-FP18A 5GHz 18dBi Flat Panel Directional Antenna
ANT-OM10A 5GHz 10dBi Omni-Directional Antenna
ANT-FP23A 5GHz 23dBi Flat Panel Directional Antenna
ANT-SE17A 5GHz 16.5dBi Sector Antenna
WL-SMA-0.6 0.6M RP-SMA(M) to N(M) Cable
WL-SMA-6 6M RP-SMA(M) to N(M) Cable
Hardware
Standard support IEEE802.11a/n
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
Chipset Ralink RT2880
Memory 32 Mbytes DDR SDRAM
4 Mbytes Flash
PoE Passive PoE
Reset Button on PoE Injector
Interface Wireless: IEEE 802.11a/n, 1T1R
LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
Antenna Internal (Default): 16dBi directional antenna (Vertical Polarization)
　　■ Horizontal: 60 degree
　　■ Vertical: 30 degree
External (Option): RP-SMA type Connector 
　　■ Switchable by Software 
　　■ For External Antenna Mode, attach antenna before power on.
Data Rate 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps 
802.11n (20MHz): up to 72Mbps 
802.11n (40MHz): up to 150Mbp
Media Access Control CSMA / CA
Modulation Transmission / Emission Type: OFDM 
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band 5.180GHz ~ 5.825GHz
Opt. Channel 5.180GHz-CH36
5.200GHz-CH40
5.220GHz-CH44
5.240GHz-CH48
5.260GHz-CH52
5.280GHz-CH56
5.300GHz-CH60
5.320GHz-CH64
5.500GHz-CH100
5.520GHz-CH104
5.540GHz-CH108
5.560GHz-CH112
5.580GHz-CH116
5.600GHz-CH120
5.620GHz-CH124
5.640GHz-CH128
5.660GHz-CH132
5.680GHz-CH136
5.700GHz-CH140
5.745GHz-CH149
5.765GHz-CH153
5.785GHz-CH157
5.805GHz-CH161
5.825GHz-CH165

The 24 channels are defined by the theory. The actual application will vary based on the regulation in different regions and countries.
RF Output Power 802.11a: 25 ± 1dBm
802.11n: 22 ± 1dBm
Receiver Sensitivity IEEE 802.11a: -90dBm 
IEEE 802.11n: -88dBm 
Output Power Control Range 1~100, default:100
Power Requirements 12V DC, 1A (switching)
Environment & Certification
Operation Temp. Temp.: -20~70 Degree C, Humidity: 10~90% non-condensing
Storage Temp. Temp.: -30~80 Degree C, Humidity: 5~90% non-condensing
IP Level IP55
Regulatory CE / RoHS
Software
LAN Built-in DHCP server supporting static IP address distributing
Supports UPnP
Supports IGMP Proxy, DNS Proxy
Supports 802.1d STP (Spanning Tree)
WAN 　　■ Static IP
　　■ Dynamic IP
　　■ PPPoE
　　■ PPTP
　　■ L2TP
VPN Passthrough 　　■ PPTP
　　■ L2TP 
　　■ IPSec
Operating Mode 　　■ Bridge 
　　■ Gateway 
　　■ Ethernet Converter (WISP)
Firewall NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Port Forwarding (Virtual Server), and DMZ
Built-in firewall with Port/ IP address/ MAC/ URL filtering
Wireless Mode 　　■ AP
　　■ Client 
　　■ WDS PTP
　　■ WDS PTMP
　　■ WDS Repeater (AP+WDS)
　　■ Universal Repeater (AP+Client)
Channel Width 20MHz / 40MHz
Wireless Isolation Enable to isolate each connected wireless clients
Encryption Type 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1x
Wireless Security Provides wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Supports WPS (WIFI Protected Setup )
Enable/Disable SSID Broadcast
Max. Wireless Client 25
Max. WDS AP 4
Max. Wired Client 60
NTP Network Time Management
Management Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS
Diagnostic tool System Log
 
Ordering Information
WNAP-7205 802.11a/n Wireless Outdoor Access Point
 
Accessories
CB-STP-25 25 Meters STP Cat5 Cable
ANT-FP18A 5GHz 18dBi Flat Panel Directional Antenna
ANT-OM10A 5GHz 10dBi Omni-Directional Antenna
ANT-FP23A 5GHz 23dBi Flat Panel Directional Antenna
ANT-SE17A 5GHz 16.5dBi Sector Antenna
WL-SMA-0.6 0.6M RP-SMA(M) to N(M) Cable
WL-SMA-6 6M RP-SMA(M) to N(M) Cable

Datasheet

Date Version Description Download
2011-11-04 1.0 WNAP-7205
 

Quick Guide

Date Version Description Download
2011-11-17 1.1 Add Protective Plug.
2011-09-02 1.0 Initial Release
 

User's Manual

Date Version Description Download
2011-09-23 1.0 Initial Release
 

EC Declaration

Date Version Description Download
2011-09-23 1.0 Initial Release
 
 
Ordering Information
WNAP-7205 802.11a/n Wireless Outdoor Access Point
 
Accessories
CB-STP-25 25 Meters STP Cat5 Cable
ANT-FP18A 5GHz 18dBi Flat Panel Directional Antenna
ANT-OM10A 5GHz 10dBi Omni-Directional Antenna
ANT-FP23A 5GHz 23dBi Flat Panel Directional Antenna
ANT-SE17A 5GHz 16.5dBi Sector Antenna
WL-SMA-0.6 0.6M RP-SMA(M) to N(M) Cable
WL-SMA-6 6M RP-SMA(M) to N(M) Cable