IAD-200W

802.11g Wireless ADSL 2/2+ VoIP Router

 
 
The PLANET ADSL 2/2+ VoIP Router - IAD-200, and 802.11g Wireless ADSL 2/2+ VoIP Router - IAD-200W, provide ISP or residential Home Users the ideal solution for sharing a high-speed ADSL 2/2+ broadband Internet connection on a 54Mbps wireless network (IAD-200W) and a 10/100Mbps Fast Ethernet backbone and also with the capability to make the calls through Internet. They can support downstream transmission rate up to 24Mbps and upstream transmission with rate up to 3.5Mbps while upstream transmission. These products support PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483 encapsulation over ATM (bridged or routed), PPP over Ethernet (RFC 2516), and IPoA (RFC1577) to establish a connection with ISP.

Via the user-friendly management interface, IAD-200/200W can be managed by workstations running standard web browsers. Furthermore, both of them provide DHCP server support, virtual server, DMZ support, VPN PPTP/IPSec pass through, and URL filtering capability.

The IAD-200/200W also serves as an Internet firewall to protect your network from being accessed by outside users. Not only provides the natural firewall function (Network Address Translation, NAT), but provides rich firewall features to secure a user's network. All incoming data packets are monitored and filtered. Besides, the FXS interface and SIP (RFC3261) protocol offer the capability to make the call in a cost-effective way, either through Internet or local phone system.
 
Ordering Information
IAD-200A ADSL 2/2+ VoIP Router, Annex A
IAD-200B ADSL VoIP Router, Annex B
IAD-200WA 802.11g Wireless ADSL 2/2+ VoIP Router, Annex A
IAD-200WB 802.11g Wireless ADSL VoIP Router, Annex B
Internet Connection with Firewall / Wireless / VoIP: 

The Planet IAD-200 / 200W is providing Internet access to all your LAN / WLAN users via the built-in ADSL 2/2+ modem. Incorporating a VoIP Gateway, it allows you to make phone calls over the Internet, providing great cost savings for long distance or oversea calls.

 
 
Ordering Information
IAD-200A ADSL 2/2+ VoIP Router, Annex A
IAD-200B ADSL VoIP Router, Annex B
IAD-200WA 802.11g Wireless ADSL 2/2+ VoIP Router, Annex A
IAD-200WB 802.11g Wireless ADSL VoIP Router, Annex B
• Internet Access Features
 –Shared Internet Access: All users on the LAN or Wireless LAN can access the 
  Internet through the IAD-200/200W using only a single external IP Address. The 
  local (invalid) IP Addresses are hidden from external sources. This process is 
  called NAT (Network Address Translation).
 –Built-in ADSL 2/2+ Modem: The IAD-200/200W provides ADSL 2/2+ modem, and 
  supports all common ADSL connections.
 –IPoA, PPPoE, PPPoA, Direct Connection Support: Various WAN connections are 
  supported by IAD-200/200W.
 –Auto-detection of Internet Connection Method: In most situations, the 
  IAD-200/200W can test your ADSL and Internet connection to determine the 
  connection method used by your ISP.
 –Fixed or Dynamic IP Address: On the Internet (WAN port) connection, the 
  IAD-200/200W supports both Dynamic IP Address (IP Address is allocated on 
  connection) and Fixed IP Address. 

• Advanced Internet Functions
 –Application Level Gateways (ALGs): Applications which use non-standard 
  connections or port numbers are normally blocked by the Firewall. The ability to 
  define and allow such applications is provided, to enable such applications to be 
  used normally.
 –Special Applications: This feature, also called Port Triggering, allows you to use 
  Internet applications which normally do not function when used behind a firewall.
 –Virtual Servers: This feature allows Internet users to access Internet servers on 
  your LAN. The required setup is quick and easy.
 –URL Filter: Use the URL Filter to block access to undesirable Web sites by LAN 
  users.
 –Logs: Define what data is recorded in the Logs, and optionally send log data to a 
  Syslog Server. Log data can also be E-mailed to you. 
 –Access Control: Allows administrators to restrict the Internet Access available to 
  PCs on your LAN
 –Firewall: As well as the built-in firewall to protect your LAN, you can define 
  Firewall Rules to determine which incoming and outgoing traffic should be 
  permitted
 –Universal Plug and Play (UPnP): UPnP allows automatic discovery and configuration 
  of the Broadband Router. UPnP is supported by Windows ME, XP, or later
 –Dynamic DNS Support: DDNS, when used with the Virtual Servers feature, allows 
  users to connect to Servers on your LAN using a Domain Name, even if you have a 
  dynamic IP address which changes every time you connect
 –VPN Pass through Support: PCs with VPN (Virtual Private Networking) software 
  using PPTP, L2TP, and IPSec are transparently supported - no configuration is 
  required
 –Network Address Translation (NAT) / Network Address Port Translation (NAPT): 
  Allows multi-users to access outside resources such as the Internet simultaneously 
  with one IP address/one Internet access account
 –RIP1/2 Routing: It supports RIP1/2 routing protocol for routing capability
 –Web-based Management: It supports web based GUI for configuration and 
  management
 –Firmware Upgradeable: Device can be upgraded to the latest firmware through the 
  WEB based GUI
 –FAX support: It supports T.38 and G.711 fax standards
 –QoS: It builds Quality of Service in the device for excellent voice quality. 

• Wireless Features (model IAD-200W only)
 –Standards Compliant: The IAD-200W complies with the IEEE802.11g (DSSS) 
  specifications for Wireless LANs. Maximum of 54Mbps are supported
 –Supports both 802.11b and 802.11g Wireless Stations: The 802.11g standard 
  provides for backward compatibility with the 802.11b standard, so both 802.11b 
  and 802.11g Wireless stations can be used simultaneously
 –WEP support: Support for WEP (Wired Equivalent Privacy) is included. Key sizes of 
  64 Bit and 128 Bit are supported
 –WPA-PSK support: Key sizes of 256 Bit TKIP encryption are supported
 –Wireless MAC Access Control: The Wireless Access Control feature can check the 
  MAC address (hardware address) of Wireless stations to ensure that only trusted 
  Wireless Stations can access your LAN. 

• LAN Features
 –DHCP Server Support: Dynamic Host Configuration Protocol provides a dynamic IP 
  address to PCs and other devices upon request. The IAD-200/200W can act as a 
  DHCP Server for devices on your local LAN and WLAN.

• VoIP Features
 –SIP 2.0 Support: IAD-200/200W is with SIP2.0 support for the compatibility of 
  most popular VoIP telephone server provider and SIP proxy gateway
 –Most SIP Proxy Server support: IAD-200/200Wcompatible with known popular 
  Internet SIP Proxy provider like FWD and Infonex
 –FXS and PSTN interface: IAD-200/200W supports one FXS interface that can direct 
  wire to any analog telephone for direct Internet Call through the Internet 
  Telephony Service Provider. The PSTN interface also makes the local phone call 
  directly, or call relay.
 
Ordering Information
IAD-200A ADSL 2/2+ VoIP Router, Annex A
IAD-200B ADSL VoIP Router, Annex B
IAD-200WA 802.11g Wireless ADSL 2/2+ VoIP Router, Annex A
IAD-200WB 802.11g Wireless ADSL VoIP Router, Annex B
Description 802.11g Wireless ADSL 2/2+ VoIP Router 
Hardware Specification
Standard Multi-Mode code support
ANSI T1.413 Issue 2
ITU-T G.994.1 (G.hs) rev. 3
ITU-T G.992.1(G.dmt)
- Annex A (ADSL over POTS for A model)
- Annex B (ADSL over ISDN for B model)
ITU-T G.992.2(G.lite)
ITU-T G.992.3 Annex A ADSL2
ITU-T G.992.3 Annex A DELT
ITU-T G992.3 Annex L READSL2
ITU-T G.992.5 Annex A ADSL2+
Protocol RFC 2364 - PPP over ATM (LLC/VCMUX) 
RFC 2516 - PPP over Ethernet (LLC/VCMUX)
RFC 1577 - Classic IP over ATM (LLC/VCMUX) 
RFC 1483 - Bridged IP over ATM (LLC/VCMUX)
RFC 1483 - Routed IP over ATM (LLC/VCMUX) 
AAL and ATM Support Integrated ATM AAL5 support, UBR, 1 PVC, OAM F4/F5 loopback 255 VPI plus 65535 VCI address range 
Ports LAN - 1 (10Base-T/100Base-TX, Auto-Negotiation, Auto MDI/MDI-X) Wireless - 1 x 802.11g wireless access point, antenna detachable WAN - 1 (RJ-11, ADSL 2/2+) Voice - 2 (RJ-11, FXS, PSTN)
LED Indicators PWR, STATUS, PSTN, PHONE, WLAN, ADSL, INTERNET
10/100 LNK/ACT for LAN port 
Button 1 for reset/factory reset
1 for power on/off 
Wireless Specification (Model: IAD-200W only)
Wireless Standard IEEE802.11b, IEEE802.11g WLAN,
Frequency 2.4 to 2.4835GHz (Industrial Scientific Medical Band )
Channels Maximum 14 Channels, depending on regulatory authorities
Modulation CCK, DQPSK, DBPSK, OFDM/CCK
Data Rate Up to 54 Mbps
WEP 64-bit, 128-bit
WPA-PSK 256-bit
Output Power 14dBm (11g typical); 18dBm (11b typical)
Receiver Sensitivity -80dBm Min.
Software
Protocol IP, NAT/NAPT, ARP, ICMP, DHCP, PPPoE, PPPoA, IPoA, RIP1/2, SNMPv1
Security Native NAT firewall, Enhanced policy-based+ SPI firewall, URL Filter, Access Control, Blocking log, Virtual Server, DMZ
VoIP SIP 2.0 (RFC3261)
PSTN life line support
Caller ID, 
Caller name, 
Dial plan,
Voice Activity Detection, CNG 
Echo Cancellation, DTMF relay
Voice codec: G.711, G.729ab
Call Waiting, 3-way conference call
Management Web browser management
Environment Specification
Dimension (W x D x H) 198 x 131 x 36 mm
Power 15V DC, 1A
Power Consumption Maximum 15W, 51 BTU
Temperature Operating: 0~40 Degree C
Storage: -10~70 Degree C 
Humidity 5~95% (non-condensing)
Emission FCC, CE

Ordering Information
IAD-200A ADSL 2/2+ VoIP Router, Annex A
IAD-200B ADSL VoIP Router, Annex B
IAD-200WA 802.11g Wireless ADSL 2/2+ VoIP Router, Annex A
IAD-200WB 802.11g Wireless ADSL VoIP Router, Annex B

Datasheet

Date Version Description Download
2009-03-31 1.0 IAD-200W
 

Firmware

Date Version Description Download
2007-11-22 0.01.33 IAD-200WA Initial release
2007-11-22 0.01.33 IAD-200WB Initial release
 

User's Manual

Date Version Description Download
2007-11-22   User's Manual
 

EC Declaration

Date Version Description Download
2008-01-25   EC Declaration
Ordering Information
IAD-200A ADSL 2/2+ VoIP Router, Annex A
IAD-200B ADSL VoIP Router, Annex B
IAD-200WA 802.11g Wireless ADSL 2/2+ VoIP Router, Annex A
IAD-200WB 802.11g Wireless ADSL VoIP Router, Annex B