| Hardware Specification |
| Attachment Interface |
PCI Express Host Bus Interface, 8 lanes / 4 lanes
PCI Express Rev 1.1a |
| Media Interface |
1 SFP+ slot (SFF-8431) |
| Optical Module Options |
LRM, LR, SR |
| Cabling Options |
SFP+ LC connector, 50/125μm & 62.5/125μm multi-mode fiber cable.
9/125μm single-mode cable. |
| Memory |
3Mb internal memory |
| Jumbo Frame |
16K |
| LED Indicators |
Link / Active per port |
| Typical Power Dissipation |
10 Watts |
| Dimension ( W x D) |
147 x 63.5 mm (Low Profile) |
| Advanced Function |
| Layer 2 Features |
• IEEE 802.3x Flow Control support
• IEEE 802.1Q VLAN support
• Multicast ACL |
| Performance enhancements |
• Microsoft Scalable Networking
• Receive-side scaling (RSS): Optimization for multiple CPUs under
Windows OS control
• Reduced host bus traffic
• Optimization for multiple CPUs
• IP acceleration
• Widely used network protocol
• IP, TCP and UDP checksum offloading
• Large Send (up to 64 KB): Increased network throughput
• IPv4, IPv6 |
| OS Support |
• Windows Server 2003, Windows Server 2008
• Windows XP, Windows Vista™, Windows 7
• Linux 2.4, Linux 2.6, Linux 64-bit
• Redhat Enterprise Linux 4.7 & 5.3
• VMware® ESX 3.5
• Multiple queues management
• Windows Management Interface (WMI) |
| Standards Conformance |
| Regulation Compliance |
FCC Part 15 Class B, CE |
| Standards Compliance |
IEEE Std 802.3ae: 10Gbps Ethernet
IEEE 802.3x: Flow Control and Back pressure
IEEE 802.1Q: VLAN Tagging |
| Environment |
| Operating |
Temperature: 0 ~ 65 Degree C
Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage |
Temperature: -10 ~ 85 Degree C
Relative Humidity: 5 ~ 95% (non-condensing) |
