POE-E304

1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender

 
 
PoE Solution for Breaking RJ45 100m Limitation
PLANET POE-E304 is a 1-port 60W Ultra PoE to 4-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE applications. The POE-E304 can obtain a maximum of 60-watt PoE power from Ultra PoE input port and supplies a maximum of 55-watt PoE power budget for four PoE output ports, extending both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time.

The POE-E304 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.
 
 
Plug and Play Installation
The POE-E304 is quite easy to be installed by simple plug and play. It is used between a power source equipment (PSE) and a powered device (PD). The POE-E304 injects power to the PD without affecting the data transmission performance. The POE-E304 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The POE-304 is designed in a compact box containing five RJ45 ports, of which one "PoE IN" port functions as PoE (Data and Power) input and the other four "PoE OUT" ports function as PoE output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously between the PSE and PD.
 
 
Ordering Information
POE-E304 1-port Ultra PoE+ to 4-port 802.3af/at Gigabit PoE Extender
One Power Sourcing for Multiple Powered Devices Solution
Is 100-meter cable long enough for a wide range of IP surveillance network deployments? The answer is certainly not. To achieve the benefits of IP surveillance and the long-distance IP camera distribution, PLANET POE-E304 is quite a useful Gigabit PoE extender if users have most of their network already set up, and hope to expand network communications and overcome cable distance limitations offering connections to devices in locations where traditional networking does not allow.
 
 
Ordering Information
POE-E304 1-port Ultra PoE+ to 4-port 802.3af/at Gigabit PoE Extender
Physical Port
    • 5-port 10/100/1000BASE-T Gigabit RJ45 interface
- 1-port data + power input- 4-port data + power output
Power over Ethernet
    • 1-port data + power input
- Complies with ultra Power over Ethernet end-span and mid-span PD- Complies with IEEE 802.3at Power over Ethernet Plus end-span / mid-span PD- Supports PoE input power up to 60 watts
    • 4-port data + power output
- Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE- Up to 4 IEEE 802.3af/802.3at devices powered- Supports PoE power up to 30.8 watts for each PoE port- Auto detects powered device (PD)
  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device

Layer 2 Features
  • Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • 9K Jumbo packet support
  • IEEE 802.1Q VLAN transparency
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
  • Automatic address learning and address aging

Case and Installation
  • No external power cable installation required
  • Made of metal, desktop size design
  • Wall-mountable, Plug-and-Play installation
  • 0 ~ 50 degrees C operating temperature
 
Ordering Information
POE-E304 1-port Ultra PoE+ to 4-port 802.3af/at Gigabit PoE Extender
Hardware Specifications
Network Connector PoE In Port
1 x 10/100/1000BASE-T Ethernet with Ultra PoE “Data + DC” in, auto MDI/MDI-X, auto-negotiation RJ45 connector

PoE Out Port
4 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC” out, auto MDI/MDI-X, auto-negotiation RJ45 connector
Data Rate 10/100/1000Mbps
Switch Architecture Store-and-Forward
MAC Address Table 2K
Data Buffer 2Mbits
Switch Fabric 10Gbps
Switch Throughput 7.44Mpps @ 64 bytes
Jumbo Frame 9K
Flow Control IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
LED Indicators PoE In Port 
10/100 LNK/ACT (Orange), 1000 LNK/ACT (Green)
PoE Out Port 1 to Port 4
10/100 LNK/ACT (Orange), 1000 LNK/ACT (Green)
PoE-in-Use (Orange)
PoE Max. (Orange)
Protection ESD (Ethernet): 6KV
Surge (EFT for power): 2KV
Enclosure Metal
Installation Desktop/Wall mountable
Dimensions (W x D x H) 160 x 92.5 x 28 mm
Weight 370g
Power Requirements PoE In: IEEE 802.3bt or 4-pair 802.3at PoE+ compliant with voltage within 50V-56V DC
External DC: 50~56V DC
Power Consumption 4 watts/13.7BTU (System on with PoE input)
6 watts/20.6BTU (Ethernet full loading without PoE function)
60 watts/205.9BTU (Full loading with PoE function)
Network Cable 10BASE-T: 4-pair UTP Cat5 up to 100m (328ft)
100BASE-TX: 4-pair UTP Cat5 up to 100m (328ft)
1000BASE-T: 4-pair UTP Cat5e, 6, up to 100m (328ft)
EIA/TIA-568 100-ohm STP (100m, 328ft)
Power over Ethernet
PoE Standard PoE In Port
Ultra Power over Ethernet end-span/mid-span PD class 4 PD
Per PoE Out Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
IEEE 802.3af Power over Ethernet end-span PSE
PoE Power PoE In Port
50~56V DC, max. 60 watts
Per PoE Out Port
44~55V DC, max. 30.8 watts
Power Pin Assignment PoE In Port
1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) or 1/2(-), 3/6(+); 4/5(+), 7/8(-)
Per PoE Out Port
1/2 (+), 3/6 (-), end-span (Type A)
PoE Power Budget 50 watts (max.) @ Ultra PoE input
20 watts (max.) @ IEEE 802.3at PoE+ input
Standard Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standard Compliance IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3x Flow Control
Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Ordering Information
POE-E304 1-port Ultra PoE+ to 4-port 802.3af/at Gigabit PoE Extender

Datasheet

Date Version Description Download
2016-11-04 1.0 POE-E304

User's Manual

Date Version Description Download
2016-10-21 1.0 Initial release.
Ordering Information
POE-E304 1-port Ultra PoE+ to 4-port 802.3af/at Gigabit PoE Extender