WNAP-7325

5GHz 300Mbps 802.11a/n Wireless Outdoor CPE

 
 
Cost-effective Wireless Solution with Superior Performance
The WNAP-7325 is designed to provide a highly-stable, better performance and cost-effective wireless solution in outdoor backhaul deployment. It offers significant range and excellent throughput compared to the traditional 802.11a wireless device while using the same transmission power. Via the embedded 14dBi dual-polarization (vertical and horizontal) directional antenna, it provides good diversity coverage and better noise immunity effect, thus increasing the real performance reaching over 100Mbps at 5km of long distance connection.
 
 
Designed for Various Requirements
The WNAP-7325 is dedicatedly designed for WISP solution that provides CPE users with Internet access via the WISP provider in rural areas. Besides, it caters to various wireless communication connectivities (AP / Client / WDS PtP / WDS PtMP / Repeater), thus meeting users’ application requirements.
 
 
Advanced Security and Rigorous Authentication
The WNAP-7325 supports WEP, WPA / WPA2, WPA-PSK and WPA2-PSK wireless encryptions, the advanced WPA2-AES mechanism and 802.1X RADIUS authentication, which can effectively prevent eavesdropping by unauthorized users or bandwidth occupied by unauthenticated wireless access. Furthermore, any users are granted or denied access to the Wireless LAN network based on the ACL (Access Control List) that the administrator pre-established. In addition, with the multiple-SSID feature, you can set up different wireless networks. The WNAP-7325 can therefore serve as a virtual access point for segmented networks tailored to any industrial need.

Less Interference, Highly Reliable Connection
By using 5GHz frequency band, the WNAP-7325 can easily avoid much interference coming from the environment where there are a maximum of 24 non-overlapping channels. Therefore, the WNAP-7325 is definitely suitable for such applications as IP surveillance, backhaul link of building to building and backbone of public service. Additionally, the self-healing/schedule reboot capability keeps connection alive all the time.
 
 
Flexible and Reliable Outdoor Characteristics
The WNAP-7325 is perfectly suitable to be installed in outdoor environments and harsh locations. With IP55 and outdoor UV resistance enclosure, the WNAP-7325 can perform normally under rigorous weather conditions. With the proprietary Power over Ethernet (PoE) design, the WNAP-7325 can be easily installed in the areas where power outlets are not available. 

Easy Deployment and Management
With user-friendly Web UI and step-by-step setup wizard, the WNAP-7325 is easy to install, even for users who never experience in setting up a wireless network. Furthermore, with the Planet Smart Discovery Utility and SNMP-based management interface, the WNAP-7325 is convenient to be managed and configured remotely.
 
Ordering Information
WNAP-7325 5GHz 300Mbps 802.11a/n Wireless Outdoor CPE
Longer Distance Coverage between LAN connections
The WNAP-7325 is a cost-effective outdoor wireless solution for widely open space applications. It is definitely suitable for outdoor wireless connections between buildings and IP surveillance facilities.
 
 
With built-in 14dBi dual-polarization directional antenna, the WNAP-7325 brings higher performance and longer distance of wireless connection. The WNAP-7325 provides high output power with multiply-adjustable Tx controller, which allows CPE users to easily install and adjust the suitable value in appropriate locations. Moreover, the WNAP-7325 supports WISP mode to enable CPE users to connect to Internet via local WISP provider.
 
 
**We recommend you to match the WNAP-7325 with our related products to get the best results.
 
Ordering Information
WNAP-7325 5GHz 300Mbps 802.11a/n Wireless Outdoor CPE
Industrial Compliant Wireless LAN and LAN
  • Compliant with IEEE 802.11n wireless technology capable of up to 300Mbps data rate
  • Backward compatible with 802.11a standard
  • Equipped with 10/100Mbps RJ-45 ports for LAN and WAN with auto MDI/ MDI-X supported

Fixed-network Broadband Router
  • Supported connection types in WISP mode: Dynamic IP/ Static IP/ PPPoE
  • Supports virtual server and DMZ for various networking applications
  • Supports DHCP server, UPnP and Planet DDNS

RF Interface Characteristics
  • Built-in 14dBi dual-polarization antenna
  • High output power up to 500mW with multiply-adjustable transmit power control

Outdoor Environmental Characteristics
  • IP55 enclosure
  • Passive Power over Ethernet design
  • Operating temperature: -20~70°C

Multiple Operations and Wireless Modes
  • Multiple operation modes: Bridge and WISP
  • Multiple wireless modes: AP, Client CPE (WISP), WDS PtP, WDS PtMP and Repeater
  • Supports multiple-SSIDs to allow users to access different networks through a single AP
  • Supports WMM (Wi-Fi Multimedia)

Secure Network Connection
  • Advanced security: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK (TKIP/AES) and 802.1x RADIUS authentication
  • Supports MAC address filtering

Easy Installation and Management
  • Web-based UI and Quick Setup Wizard for easy configuration
  • Planet Smart Discovery Utility allows administrator to discover and locate each AP
  • SNMP-based management interface
  • System status monitoring includes DHCP Client and System Log
 
Ordering Information
WNAP-7325 5GHz 300Mbps 802.11a/n Wireless Outdoor CPE
Hardware Specifications
Standard Support IEEE 802.11a/n
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
Memory 64 Mbytes DDR SDRAM
16 Mbytes Flash
PoE Passive PoE
Interface Wireless IEEE802.11a/n, 2T2R
PoE LAN (LAN 1): 1 x 10/100Base-TX, auto-MDI/MDIX, passive PoE
LAN 2: 1 x 10/100Base-TX, auto-MDI/MDIX, passive PoE pass-through
Antenna Built-in 14dBi dual-polarization antenna
 - Horizontal: 30 degrees
 - Vertical: 20 degrees
Wireless RF Specifications
Wireless Technology IEEE 802.11a
IEEE 802.11n
Data Rate IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps 
IEEE 802.11n (20MHz): up to 150Mbps 
IEEE 802.11n (40MHz): up to 300Mbp
Media Access Control CSMA/CA
Modulation Transmission/Emission type: OFDM 
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM 
Frequency Band 5.180GHz ~ 5.825GHz
Operating Channel 5.180GHz CH36
5.200GHz CH40
5.220GHz CH44
5.240GHz CH48
5.260GHz CH52
5.280GHz CH56
5.300GHz CH60
5.320GHz CH64
5.500GHz CH100
5.520GHz CH104
5.540GHz CH108
5.560GHz CH112
5.580GHz CH116
5.600GHz CH120
5.620GHz CH124
5.640GHz CH128
5.660GHz CH132
5.680GHz CH136
5.700GHz CH140
5.745GHz CH149
5.765GHz CH153
5.785GHz CH157
5.805GHz CH161
5.825GHz CH165
*The 24 channels are defined by the theory. The actual application will vary based on the regulation in different regions and countries.
RF Output Power (Max.) IEEE 802.11a: up to 25 ±1dBm
IEEE 802.11n: up to 24 ±1dBm
Receiver Sensitivity (dBm) IEEE 802.11a: -94dBm
IEEE 802.11n: -93dBm
Output Power Control 12~27dBm
Power Consumption 12W
Power Requirements LAN: 24V DC, 1A/ Passive PoE
   Pin 4,5 V DC+
   Pin 7,8 V DC-
   Pin 3 Reset
Software
LAN Built-in DHCP server supporting static IP address distribution
Supports 802.1d STP (Spanning Tree)
WAN ■ Static IP
■ Dynamic IP
■ PPPoE
Operating Mode ■ Bridge 
■ WISP
Firewall NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting virtual server and DMZ
Built-in firewall with port/ IP address/ MAC/ URL filtering
Wireless Mode ■ AP
■ Client 
■ WDS PTP
■ WDS PTMP
■ * WDS Repeater (AP+WDS)
Channel Width 20MHz / 40MHz
Wireless Isolation Enable to isolate each connected wireless client to let them cannot access mutually
Encryption Type 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1x
Wireless Security Wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Enable/Disable SSID Broadcast
Multiple SSIDs * Up to 8
Max. Wireless Clients 25
Max. WDS APs 8
Max. Wired Clients 60
WMM Supports Wi-Fi multimedia
QoS Supports Quality of Service for bandwidth control
NTP Network Time Management
Self Healing Supports Schedule Reboot
Management Web UI, DHCP Client, Configuration Backup and Restore, Dynamic DNS, and SNMP
Diagnostic Tool System Log, Ping Watchdog
Environment and Certification
Operating Temperature -20~70°C
Operating Humidity 10~95% non-condensing
IP Level IP55
Regulatory CE, FCC, DFS/TPC, RoHS
Accessory
Standard Accessories ■ WNAP-7325 x 1
■ PoE Injector x 1
■ Power Cord x 1
■ Plastic Strap x 1
■ Quick Installation Guide x 1
Remarks * Means future firmware support
Ordering Information
WNAP-7325 5GHz 300Mbps 802.11a/n Wireless Outdoor CPE

Datasheet

Date Version Description Download
2014-11-21 1.0 WNAP-7325

Firmware

Date Version Description Download
2014-12-26 1.0.6 Initial Release.

Quick Guide

Date Version Description Download
2014-10-03 1.0 Initial release.
Ordering Information
WNAP-7325 5GHz 300Mbps 802.11a/n Wireless Outdoor CPE